A/C Coil Cleaning
Heating and air conditioning control units, as well as outlet vents require maintenance because their intake vents can get dirty thereby compromising the effectiveness of
the facility heating or cooling. When this occurs, the facilities utility bills can skyrocket.
Many facilities utilize a contractor to perform regular cleaning on the system to prevent these problems from occurring. If they are not maintained, air laden with contaminants such as mold, dirt, and dust can be breathed regularly by every customer that enters the facility. Depending on the type of contaminants, adverse health conditions can result. This is the basic reason that many commercial establishments, engage in such a preventative maintenance program.
Where Can Coils and HVAC Systems Be Found?
- Restaurants
- Retail establishments
- Office buildings
- Manufacturing facilities
- High rises
Why Clean Coils on HVAC Units?
- It saves on energy costs because the coils work more efficiently.
- The coils can be maintained at their peak efficiency.
- It prevents expensive equipment breakdowns.
- Indoor air quality improves and reduces the potential for any breathing or airway problems.
- The shelf life of your products is increased because the system is working more efficiently.
- Eliminates any indoor odors.
- Helps prevent slip and fall accidents.
- Glittered.
Dirty coils interfere with the adequate heat transfer which causes higher discharge pressures. Higher discharge pressures mean that it takes more electricity to do the same job. This costs money. Dirty coils can cost as much as 37% more to operate as its energy consumption increases. In fact, higher temperatures and system pressures resulting from not being maintained, can result in the breakdown of compressor lubricant.
- Dirty coils reduce cooling
- Dirty coils shorten equipment life span
- Dirty coils affect air quality
- Dirty evaporators spread mold and biological contaminants
Formation can result in acid burn out of equipment. Compressor failure means no cooling and compressor replacement can be very expensive. Prevention and care are the best approaches.
Clean Green Restoration offers full service coil cleaning.
Interested in A/C coil cleaning, roof cleaning, mold removal and more? Call Clean Green Restoration.
Awning Cleaning
Have you ever gone out on a balmy summer evening to a restaurant and sat on the deck? Many restaurants and even residential homes have either retractable or non-retractable awnings.
Awnings prevent dirt, leaves, mold, and even rain from falling upon you. However, these biological agents that fall on the awning discolor it, adhere to its surface, and cause the growths to start eating into the surface!
Boat Cleaning Service | Olympia
Boat maintenance and cleaning can be a chore, but it is very important to do. Boats in the Puget Sound in Olympia are subject to marine life, harsh weather, and salt water that can be damaging over a long period of time.
Mussels, algae, and other marine growths over time adhere to boat keels that are below the surface. The boat surfaces may also simply appear discolored or dirty from oil and grime. Typically at the end of the season boats are cleaned prior to “dry docking” them for the winter or off season.
Our System cleans boat surfaces such as:
- Keels
- Decks
- Hulls
- Walkways
- Canvas Items
- Rudders
Our System is applied and does the majority of the work in removing the growths that typically appear on boat surfaces. Annual cleaning is critical to prevent growths from compromising the hull and the seaworthiness of the vessel. This is particularly important with boats because if the growths have compromised the hull to the extent that patching and replacement must be done the seaworthiness of the vessel can be in question and the cost to fix this problem is much more costly. The System also brightens the boat surfaces to their original color and luster creating a “like new” appearance.
Building / House Washing (Exterior)
Exterior Home Washing
Most buildings have exteriors consisting of brick, vinyl siding, aluminum siding, stone, masonry, or cedar. Up to now, high pressure washing with bleaching agents and acid cleaning were the only method to clean these surfaces. Besides being harmful to the environment, these products actually damage the surface. Vinyl becomes chalky with bleach. High pressure acid cleaning damages the brick by pitting it, and it can burn the brick, turning it to an orange color.
Our LVLP (Low Volume Low Pressure) environmentally safe system does solve all these problems and makes exterior surfaces look like new. In one step, we can clean and restore all the above surfaces by removing the unsightly mold, mildew, dirt, chalkiness, pollution, and environmental staining.
Over the past 2 decades, we have developed great expertise on large and small scale restoration projects. Caltex International Ltd. invented, improved, and implemented the LVLP technology 17 years ago. With millions of jobs having been done since then, this Low Volume Low Pressure technology uses organic, non-toxic, biodegradable, USDA approved, and environmentally safe products manufactured by Caltex. Clean Green Restoration is a Caltex dealer.
Carpet & Floor Cleaning
Carpet and floor stains can have causes such as:
- Red wine
- Ketchup
- Grease
- Salad dressing/oil
- Pets not fully potty trained/incontinence problems
- Dirt
- Ink
- Soot from fireplaces
- Grass marks
- Blood
- Many more
Why Clean Coils on HVAC Units?
Anyone who has a pet knows the problems that occur when a carpet is soiled. Its results in not only a stain, but the odor does not go away. If the odor is not removed it can permeate a household and be quite unpleasant. Our System removes pet spots and their associated odors. Our System is applied and does all the work on these biological agents. In addition, the stains themselves are removed and the carpeting is brought back to a clean new look in one step without over scrubbing, and hard labor.